DC18 DISC SAW
The radial DC18 is the same tool as the DC14 and the DC16 but with a hydraulic motor to operate with a flow rate of 38L / min. The saw supports different sizes of discs: 300, 350, 400 and, to have several rotational speeds, it can work with a flow rate of 20, 30 or 40 L / min.
PRECISION ALTIMETER TRITECH PA200 / PA500
High performance electronics in a proven compact and robust design for accurate height off seabed and subsea distance measurements.
HD13 HYDRAULIC HAMMER DRILL
13 kg hydraulic hammer drill for concrete, masonry and natural stone. Powerful and light, its use is ideal when performance, maneuverability and safety are required. The attack of the tops is the universal standard SDS MAX which allows to use a wide range tips and accessories available everywhere
AS23 HYDRAULIC GRINDER
AS23 is a compact angle sharpening saw which, thanks to its hydraulic operation, provides power, reduced noise, long life and maximum safety with the implicit impossibility of electric shock.
KV19 BREAKER
KV19 hydraulic breaker Kg19 with “T type” anti vibration handles suspended on springs , tool is “operator friendly” and its use ideal in general demolition works of concrete and asphalt cutting. KV19 gives the best compromise between high power and manoeuvrability, can be powered by power pack sor by the hydraulic circuit of mini excavators, trucks or other machines with sufficient hydraulic circuit.
BR67 UNDERWATER BREAKER/DRIVER (With C.E.)
The BR67 is a medium sized breaker in Stanley Hydraulic Tools line up of underwater paving breakers. The BR67is in the 70 lbs class of breakers and is used for medium concrete and rock breaking, coral removal and rod driving.
BR45 HYDRAULIC BREAKER (With C.E.)
The BR45 is the smallest breaker in the Stanley Hydraulic Tool lineup of underwater breakers. The feathering on/off valve controls speed and allows easier initial tool placement. Standard 1" hex chuck and latch retainer. Painted hi‑visibility yellow.
USBL S2CR
EvoLogics S2C R USBL is a series of combined positioning and communication devices for a variety of subsea applications.
ACOUSTIC RELEASE BEACONS AND POSITIONING BEACONS
Acoustic release beacons are used to recover or lower equipment deployed under the sea, either in shallow or continental shelf waters.
CH15 UNDERWATER CHIPPING HAMMER
The Stanley Submarine CH15 Breaker Hammer is a lightweight yet powerful alternative to pneumatic tools. Designed for medium and heavy duty jobs, due to its high power to weight ratio the CH15 becomes the ideal tool for scuba divers working in concrete.
CO23 UNDERWATER CUT-OFF SAW
The Stanley Hidraulica Submarine CO23 Circular Saw was designed for use underwater, but it is also a very useful tool on land. The CO23 uses wet or dry abrasive diamond discs, with a standard 10 inch (25.4 cm) diameter for cutting metals or concrete.
CS06 CHAIN SAW
The Stanley CS06 Underwater Hydraulic Chainsaw features a 15-inch saw and today offers the diver a tool with the highest power-to-weight ratio underwater on the market today.
CS11 UNDERWATER CHAIN SAW
The CS11 Underwater Work Circular Saw is designed to cut any type of wooden structure underwater, including bridge piers, docks and jetties. It was created to provide the diver with a very high chain speed to easily cut even the sturdiest posts and pillars.
DS11 CHAIN SAW
The DS11 Diamond Chain Saw is designed for cutting concrete underwater. It is suitable for cutting corners without overcuts and can cut walls up to 45 cm thick. Two bar lengths (38 cm and 45 cm) and two different types of chain are available. A minimum of 20 psi of water pressure is required at the saw to cool and lubricate the bar and chain.
UNDERWATER GPS G2
Underwater GPS G2. Worlds most robust positioning system! 100 or 300 meter range. Quick deploy antenna.
GR29 UNDERWATER GRINDER CE W/COUPLERS
The Stanley GR29 is a right angle sharpener that can be used for roughing and cleaning in underwater applications with a variety of discs, brushes and accessories